|Home||» Products||» Shrink Wrapping Machine||» Shrink Wrapping Machine|
We have a reputable stand in the market as the manufacturer, supplier and exporter of Automatic shrink Wrapping machine. Made of superb quality raw materials, these products have a strong and sturdy construction. These products are used in varied packaging units for rapping shrink foil and paper on different items. Known for their effective functioning, these products have earned a high demand among our clients. Automatic shrink Wrapping machine is delivered to the clients in a timely manner owing to our expert logistics team.
Multiple wrapping systems using LDPE Material with 2side opening for heavy cases. Operation of the System:
The system consists of 2 units, one a wrapping unit that
is used to wrap the product with the shrink film and the second unit where the
shrinking of the product with the film takes place. The recommend models for your
application are AW-650 and S.W. 5045 H.D
The product to be wrapped will be placed in the base tray and fed into the
auto-wrapping machine. The bottles with the tray must be placed before the
pneumatic pusher arm. Once the product has been placed manually pusher pulse
has to be given manually. The tray with the bottles will fed into the machine for
sleeve wrapping over the product. And then the sealing pulse must be given. The
sealing takes place with the help of pneumatic system for which air supply has to be
provided. Shrinking of the film takes place at a set temperature and speed of travel.
Type of Collation: In Tray Pack with film.
Material of Packing: Shrinkable PE.
Heavy Duty Shrink Tunnel: SW-5045-H.D with Cooling Chamber
Sealing Length: 650mm
Sealing with cut facility suitable for LDPE material
Pneumatically operated sealing system
Air Pressure req. 6 Kg.sq/cm
M.O.C: In M.S Duly Powder Coated
Pneumatic film unwinding system will be provided
Two roll feeding system for Film
Timer based sealing, cooling
Power: 230V, 50Hz, 15 Amps
Sealing watts: 1.2 K.W
Rubber coated rollers with locking for film holding in top and bottom
Pusher: Pneumatic pusher works at 4-5Kg. pressure
Shrink Tunnel with Cooling Chamber:
Chamber Size: 500mm(W) x 450mm(H)
Hot Air Chamber Size: 500mm(W) X 450mm(H) X 1000mm(L)
Cooling Chamber: 500mm(W) X 450mm(H) X 400mm(L)
Machine Dimension: 1000mm(W) X 1000mm(H) X 2000mm(L)
Conveyor: Roller type
Conveyor Drive: 1 H.P Variable Speed Drive, A.C Drive
Heavy Duty chains with pins for conveyor assembly.
Heater: 12 K.W Open type Porcelain heaters for better efficiency and
Digital Temperature controller with sensor to control the chamber temperature
With PID Controller system
Hot Air Blower: High velocity with ‘F’ class insulation, ¼ H.P
Cooling Fan: 200-Watts capacity
Heavy Duty Gear box with the motor
Separate indicator for Input lines, Blower, Cooling fan, and Motor
Interlocking system between the controls for safety reasons.
Insulation: double class, Padded Glass Wool insulation for better heat insulation.
Aluminum Heat resistant coating for the Hot Air Chamber.
M.O.C: In Mild Steel duly Powder Coated
Power: 440V, 50Hz, 3 Phase